LOUQE Raw S1 Mk I (Rhodium Grey) Mini-ITX Computer Case

Product Information

Whoa! This is awful. CPU performance has tanked, and GPU temps are through the roof. The Air Temp tells the story here: even with an exhaust fan, the case is not able to get the hot air out. Is it perfect? From one point of view, no. It doesn’t have air filtration. There’s no real front IO, and no room for expansion. But none of that is what the Louqe Raw S1 is about. Extra fans, filtration, and expansion space would make the chassis bigger and more complex, entirely defeating the point. Louqe's CPU Cooler Test and their support recommend adding an A12x15 fan on top of the NH-L12 GE cooler to achieve silent performance. You can get extra 120mm fan clips from Noctua for free to mount it, and you should get "silent" full performance! Despite its unique design, the case’s thermals do not suffer. LOUQE has tested temperatures in the chassis with two different GPUs. Using the 3D-mark Firestrike extreme benchmark, the Nvidia RTX 3080 FE (2-slot) reached 70 °C with the case closed. In the same test, an EVGA RTX 2070 FTW3 Ultra (3-slot) reached just under 60 °C. The Raw S1’s ability to fit 3-slot graphics cards is a nice step-up from some competitors. It supports triple-slot GPUs up to 145 x 65 x 320 mm in size. For comparison, the Ghost S1 fits dual-slot GPUs up to 143a x 45 x 305 mm.

An anemometer is a device that measures air speed. I measured air speed at 9 points around the exhaust vent and multiplied the average by the approximate area of the vent openings to get an airflow number in CFM. It's not perfect, but it will get us some ballpark numbers. Internally, the Revolt 3 can also house almost any Mini-ITX system you throw at it, with room for large GPUs, up to a 280mm AIO, two 2.5-inch SSDs and one 3.5-inch drive. Better yet, its layout meanst it doesn't need a PCI-e riser cable, so you won’t have to worry about reduced bandwidth on an RTX 3000 or RX 6000 series graphics card. However, you can fit a PC in here. There’s no AIO support, nor air filtration. So yes, there are sacrifices, but it offers among the easiest build processes – chances are you’ll be done building within the hour and have a very tidy end result. It will also happily fit huge triple-slot graphics cards, despite its ultra-compact 12-litter frame, and with a fancy ‘Cobalt’ PCIe 4.0 riser cable, there’s hardly a thing about this case that isn’t ultra-premium. It even has a carrying handle. I'm fairly sure that the same issue affecting the CPU performance is affecting the GPU. It's just not able to pull in cool air from outside. People using triple slot GPUs seem to have fewer issues, presumably because the fans are closer to the shell. A duct would probably help this, but it would have to be custom-designed for every model. As for looks, the Ghost S1 is most similar. In fact, it looks quite a bit like the same case stood vertically if a few inches were added all around. This is not an issue; the design of the Ghost S1 is a major selling point for many buyers. However, people who were not fans of LOUQE’s last offering are unlikely to change their minds here.

For most getting into the mini-ITX cases, you can't go wrong (and may not go any further) going with the NR200. It's much smaller than the big cases you may have been using, and it's easy to build in. You don't necessarily have to get the Max version if you weren't planning on going with an AIO build. However, if you were, then it doesn't get much easier than the Max with the large 850W PSU and AIO already installed. The new RAW S1 promises full gaming PC power in one of the smallest chassis currently available. Its thin, minimum aesthetic is also unique; the popular Corsair One and Ghost S1 are two of the only other thin cases of this size. Outside of these options, it is rare to find other models that can also support powerful components. In an already limited category, LOUQE aims to situate itself as the best option. GIGABYTE B550I AORUS PRO AX gave me a bit of headache. CPU cooler clearance is perfect, plenty of room at all sides, however I struggled with CPU-less bios flash. I had to flash the bios to get support for Ryzen 5000 and I couldn't make the flash work. Eventually I googled out that it only works with USB 2.0 thumb drives. Granted I was using USB 3 thumb drive. So I replaced it with older USB 2.0 thumb drive and then the flash went through properly. Another problem with the board is that PWM fan speed regulation sometimes does not work. I have created separate post about it here: https://www.reddit.com/r/gigabyte/comments/r79tra/pwm_sometimes_failing_on_b550i_aorus_pro_ax/ . Not sure if it's issue with my concrete piece or if it's general problem with all these boards. This was resolved by removing Gigabyte software (SIV and EasyTune Engine). Aesthetically, the Raw S1 has a unique look that blends a modern style with aggressive, “gamer”-esque patterns and details. Red details on the interior, sand-blasted aluminum, and interesting cooling lines accentuate the look. However, most of the build is a simple sheet of aluminum. LOUQE has masterfully balanced these aesthetic choices with performance thanks to small features like a floating top plate and uni-body construction. It is extremely similar to the Corsair One in size, while their designs differ dramatically. Both are slim, vertical cases that are 12 liters in volume that can fit almost anywhere. That, plus the money you spend on the case is money you’ll save on cutting the RGB and not caring about what your motherboard or GPU look like – not only do you not see the internals – you simply can’t fit much in here.

My guess is that the GPU cooler moves enough air that some of it happens to escape through the top. I don't have a great explanation for the CPU; I suspect the vent changes some internal turbulent flow pattern that keeps hot air closer to the CPU/mobo. The CPU Cooler Test - I'll get to this in more detail, but it convinced me thermals are acceptable which is not really the case. For completeness' sake, I ran a set of tests with all the mods. The vented top fan still doesn't really make much of a difference. As an experiment, I tried to figure out the minimum fan speed required to get close to maximum performance. It turns out that with every fan at 75%, I can get within 1% of CPU performance. It's extremely loud, though, and it still doesn't get the GPU Temps down. With a small footprint and beautiful finish in both the tempered-glass and mesh variants, the Evolv Shift 2 is perfect as an SFF PC for use in the living room, or moving around the house wherever you need it. The easily accessible top IO makes plugging devices in a breeze too. Building in it was tight, and came with the typical frustrations associated with Mini-ITX systems, but I still managed a build within about 3 hours, and the end result was well worth the effort. The overall size is a bit bigger than most Mini-ITX cases would be, but the tempered glass side panels do wonders for creating systems to show off, though keep in mind that its single-fan radiator support may be too thermally limiting for some systems. This does make me wonder a little about Louqe's quality control, and what kind of awful drill press their manufacturer is using. I have noticed a pattern of occasional QC issues like this popping up on Discord, but to Louqe's credit, their support does a great job of taking care of any issues.

Table of contents

Their previous cases are some of the most popular choices for Mini-ITX builds around thanks to their premium materials and minimalist aesthetics. From early images and specs, the new LOUQE Raw S1 offers an increase in size without compromising on much of anything. We can actually quantify the effect of these poor design choices and how much improvement the gasket offers by measuring the airflow. Because of this, I would actually say the Raw S1 is perfect – because it does a 100% job at achieving what the designers set out to achieve: a simple, easy-to-work-on minimalist system that looks the part and cools well.

top exhaust fan - I, and many others on Discord thought this fan mounts on the interior of the case. It doesn't. You have to remove the top lid and mount the fan on top of the shell, which ruins the looks of the case (did anyone really buy this case for a reason other than looks?). It's also a giant pain to wire up because you either have to connect it after the shell is on or have a really long cable. The reason feels deceptive is that none of their pictures show it! They all have the top lid on. There are two other cooler options recommended by the community: Scythe Big Shuriken 3 Rev. B and the Thermalright AXP120-X67. Both of these have top mounted 15mm fans, but a 25mm fan can also apparently fit, closing the gap to the shell with a little more wiggle room.Air Temp is measured by the mobo, and it's obviously high. This is because the cooler is blowing hot CPU air right on the mobo sensors, but it's still useful for relative measurements. The only real catch to this chassis is that it relies entirely on the AIO for airflow. But in testing, we found that this setup is perfectly adequate, even when we threw our high-TDP i5-11600K and RTX 3080 Ti graphics card at it. Despite the added pain, the extra fan definitely improves things. The CPU is nearing maximum performance. When I tested the extra fan in open air, though, the difference was minimal. This tells us that the real benefit to having the extra fan is not improving static pressure through the heatsink, but rather cool intake air! With such a tight fit, the extra fan basically acts as a gasket for the CPU cooler. This case needs custom length power/fan cables (without sleeves, since you can't really see them anyways) because space is so limited. I recommend using PET hookup wire, since it's easy to work with and very thin. As I'll get into later, maximum airflow is very important. What sets the Louqe Raw S1 apart from the crowded world of PC cases is that it isn’t afraid to go in a totally different direction and limit your options. There is no tempered glass, no watercooling support, no RGB, nothing that falls into the typical trends of today’s day PC case design. And that, I applaud. It takes courage as designers to swim against the current and try something like this.

The next significant drop in size that I'd recommend is the Ncase M1. It does cost a bit more, but it's an excellent performer that's proven over the test of time. Some of these small sandwich builds can really build the heat on either the GPU or CPU, and some you are forced to use liquid cool. But the Ncase M1 let's you decide how you want to cool it - air or liquid. Great flexiblity, and you even have a Type C port available on the front. Just try to buy a GPU < 300mm in length to install into it. I've even seen 3090 builds in it, so it can definitely be a ton of power in such a small case. So if you're going into the small cases, enjoy your journey down the rabbit hole! You'll wonder why you ever put up with large towers! The disappointing part is that with ~5mm extra height on the shell and some clever rearranging of the internals, Louqe could have fit a 140x15mm fan on top. I suspect, though, that they wanted a solid top plate for aesthetic reasons. They're clearly good designers, though, so I'm sure they could come up with something.Once that's all done, I'm going to test the other two coolers I mentioned above, and add an intake duct for the GPU. An important note: the Corsair One case is only available in prebuilt configurations, severely limiting GPU and CPU options. Meanwhile, the Raw S1 will support most graphics cards and CPUs on the market thanks to its construction. The Raw S1 is a more subtle design than the Corsair One, opting for simple sides and vents instead of the Corsair One’s LEDs and large vents. Instead, the Raw S1 looks much closer to its smaller brother, the Ghost S1. There are almost no markings or features on the outside of the case. In fact, the front only features one small button for power, and I/O options are limited to a single Type-C placed on an angled panel. The spine-and-shell design make the RAW S1 extremely easy to build in. With the shell off, you have plenty of room to install components, route cables, etc. I definitely recommend following the instructions since there are a few things to remove before the shell can be taken off. All of the included cables (PSU input, power switch, USB-C, PCI-E 4.0) were easy to install and route. There's some community unhappiness with the fact that the USB-C cable uses the mobo I/O instead of the internal connector. It's certainly easier, but there's no reason Louqe couldn't have added a hole in the case bottom with a proper USB-C internal cable.